How do I set up the AlphaTRAK 2 Blood Glucose Monitoring System for the first time? (AlphaTRAK Blood Glucose Monitoring System User Guide)

Answer

manuals.plus

Dec 07, 2024 - 01:39 AM

To set up the AlphaTRAK 2 Blood Glucose Monitoring System for the first time, please follow the steps below:

1. Prepare the necessary items: You will need the AlphaTRAK 2 meter, test strips, lancets, a lancing device, and a control solution (optional).

2. Insert the battery: Open the battery compartment on the back of the meter and insert the battery according to the polarity markings. Close the compartment securely.

3. Set the date and time: Press the "M" button to enter the setup mode. Use the arrow buttons to navigate to the "Set Date/Time" option and press the "M" button again. Adjust the date and time using the arrow buttons and confirm your selection by pressing the "M" button.

4. Prepare the lancing device: Load a lancet into the lancing device as per the device's instructions. Adjust the depth setting if necessary.

5. Insert a test strip: Insert a test strip into the meter's test strip port. The meter will turn on automatically.

6. Apply blood sample: Use the lancing device to obtain a blood sample from your pet's ear or paw pad. Gently squeeze the area to ensure an adequate blood drop forms. Touch the tip of the test strip to the blood drop until the meter beeps.

7. Wait for the result: The meter will display the blood glucose result on the screen after a few seconds. The result will be stored in the meter's memory automatically.

8. Remove the test strip: After obtaining the result, remove the test strip from the meter. The meter will turn off automatically after a short period of inactivity.

Please note that this is just a brief overview of the setup process. For more detailed instructions and illustrations, refer to the AlphaTRAK 2 Blood Glucose Monitoring System User Guide provided in the link you provided.