User Manual Q&AAnswer
Dec 06, 2024 - 04:40 AM
To set up the Coredy R550 Robot Vacuum Cleaner for the first time, please follow the steps below:
1. Charge the Robot Vacuum: Connect the charging dock to a power source using the provided adapter. Place the robot vacuum on the charging dock, and the battery indicator on the robot will light up red, indicating it is charging. It takes approximately 4-5 hours to fully charge the battery.
2. Power On: Once the robot vacuum is fully charged, press the power button located on the top of the robot or use the remote control to turn it on. The power indicator will light up blue.
3. Select Cleaning Mode: The robot vacuum offers four cleaning modes - Auto, Spot, Edge, and Max. Use the remote control or the buttons on the robot to select the desired cleaning mode. The selected mode will be indicated by the corresponding LED light on the robot.
4. Schedule Cleaning: If you wish to schedule the robot vacuum to clean automatically at specific times, use the remote control to set the cleaning schedule. Refer to the "Scheduling Cleaning" section in the owner's manual for detailed instructions.
5. Start Cleaning: To start the cleaning process, press the "Start/Stop" button on the robot or use the remote control. The robot vacuum will begin cleaning in the selected mode. It will navigate around obstacles, avoid stairs, and return to the charging dock when the cleaning is complete or when the battery is low.
Note: It is recommended to read the complete owner's manual for detailed instructions on using and maintaining the Coredy R550 Robot Vacuum Cleaner.
Add New Comment