User Manual Q&AAnswer
Dec 06, 2024 - 04:28 AM
To charge the G-Tech AirRam AR20 MK2 Cordless Vacuum Cleaner, please follow these steps:
1. Ensure that the vacuum cleaner is turned off and the power switch is in the "O" position.
2. Plug the charger into a suitable power outlet.
3. Connect the charger cable to the charging socket located on the back of the vacuum cleaner.
4. The charging indicator light on the vacuum cleaner will illuminate, indicating that the charging process has started.
5. Allow the vacuum cleaner to charge for approximately four hours or until the charging indicator light turns off.
6. Once fully charged, disconnect the charger from the power outlet and remove the charger cable from the vacuum cleaner.
It is important to note that the G-Tech AirRam AR20 MK2 Cordless Vacuum Cleaner should be fully charged before its initial use and after each use to ensure optimal performance. The vacuum cleaner can be used while charging, but it may take longer to reach a full charge in this mode. For more detailed information and safety instructions, please refer to the operating manual provided.
Add New Comment