User Manual Q&AAnswer
Dec 06, 2024 - 03:27 AM
To adjust the height of the WAAO 128 Phone Tripod, follow these steps:
1. Extend the tripod legs: Hold the tripod firmly and pull the legs outward until they reach the desired height. The tripod has three leg sections that can be extended or retracted.
2. Lock the legs in place: Once you have extended the legs to the desired height, twist the leg locks clockwise to secure them in place. This will ensure stability and prevent the legs from collapsing.
3. Adjust the center column (if applicable): Some versions of the WAAO 128 Phone Tripod may have a center column that can be adjusted for additional height. If your tripod has a center column, locate the adjustment xxxx or lever near the top of the tripod. Turn the xxxx or release the lever to raise or lower the center column to the desired height. Once adjusted, tighten the xxxx or re-engage the lever to secure the column in place.
4. Check stability: After adjusting the height, ensure that the tripod is stable and level. Adjust the legs or center column as needed to achieve a balanced and secure setup.
Please refer to the WAAO 128 Phone Tripod User Manual for more detailed instructions and illustrations on adjusting the height of the tripod.
Add New Comment