How do I switch between propane and gasoline fuel sources on the Champion 76533 Dual Fuel RV Ready Portable Genera (Champion 76533 Dual Fuel RV Ready Portable Generator Operator's Manual)

Answer

manuals.plus

Dec 06, 2024 - 02:55 AM


To switch between propane and gasoline fuel sources on the Champion 76533 Dual Fuel RV Ready Portable Generator, follow these steps:

1. Ensure the generator is turned off and the engine is cool before attempting to switch fuel sources.

2. Locate the fuel selector switch on the control panel of the generator. The fuel selector switch has three positions: OFF, GAS, and LPG.

3. If you want to use gasoline as the fuel source, set the fuel selector switch to the GAS position.

4. If you want to use propane as the fuel source, set the fuel selector switch to the LPG position.

5. Before starting the generator, make sure the appropriate fuel source (gasoline or propane) is connected and properly hooked up to the generator according to the instructions provided in the manual.

6. Once the fuel selector switch is set to the desired fuel source and the fuel is properly connected, you can start the generator following the starting instructions provided in the manual.

Note: It is important to remember that the generator should be turned off and the engine should be cool before attempting to switch fuel sources. Also, ensure that the fuel selector switch is set to the OFF position when the generator is not in use.

For more detailed information and safety precautions regarding fuel selection and usage, please refer to the Champion 76533 Dual Fuel RV Ready Portable Generator Operator's Manual provided in the link.