Answer
Dec 06, 2024 - 02:49 AM
There are two methods for installing the wall-mounted charging stand:
Method 1: Sticker Installation 1. Clean the wall surface where you want to install the charging stand. 2. Peel off the backing of the alignment sticker and stick it to the wall. 3. Drill three screws according to the hole positions on the alignment sticker. 4. Insert the plastic expansion tubes into the xxxx holes. 5. Align the hanger with the xxxx holes and tighten the screws to secure the charging stand. Method 2: xxxx Installation 1. Clean the wall surface where you want to install the charging stand. 2. Drill three screws according to the hole positions of the alignment sticker. 3. Insert the plastic expansion tubes into the xxxx holes. 4. Align the hanger with the xxxx holes and tighten the screws to secure the charging stand. Please refer to the user manual for detailed illustrations and instructions on the Proscenic P11 Smart Cordless Vacuum Cleaners User Manual .
Add New Comment