User Manual Q&AAnswer
Dec 06, 2024 - 02:44 AM
Adjusting the height of the ELENKER YF-9003B Knee Walker Steerable Scooter is a simple process. Here are the steps to adjust the height:
1. Locate the height adjustment mechanism: The height adjustment mechanism is typically located near the handlebars of the knee walker. It may be a xxxx or lever that allows you to change the height.
2. Loosen the adjustment mechanism: If it is a xxxx , turn it counterclockwise to loosen it. If it is a lever, lift or push it to release the lock.
3. Adjust the height: Once the adjustment mechanism is loosened, you can slide the knee pad and handlebars up or down to your desired height. Make sure to align the holes or notches on the knee pad and handlebars with the corresponding height adjustment positions.
4. Secure the adjustment: Once you have set the desired height, tighten the adjustment mechanism by turning the xxxx clockwise or pushing down the lever to lock it in place. Ensure that the knee pad and handlebars are securely held at the chosen height.
5. Test the height: Before using the knee walker, make sure to test the height adjustment by placing your injured leg on the knee pad and ensuring that your non-injured leg comfortably reaches the ground for stability and maneuverability.
Please refer to the user guide provided with your ELENKER YF-9003B Knee Walker Steerable Scooter for specific instructions and illustrations on adjusting the height.
Add New Comment