User Manual Q&AAnswer
Dec 06, 2024 - 01:58 AM
To install the Amazon Basics JTG3-17cm Wall-Mounted Vanity Mirror, follow these steps:
Step 1: First, take the measurement of the desired location on the wall where you want to mount the mirror.
Step 2: Drill a hole in the wall using a drill machine and fix the xxxx in the wall with the help of a plastic xxxx holder. Make sure to use fasteners that are appropriate for the mounting surface, such as a wooden or masonry/concrete wall. Do not install on drywalls, wall boards, or thin plywood as they may not be able to support the weight of the mirror.
Step 3: Now, mount the mirror on the wall by attaching it to the xxxx . Use the provided mounting hardware for easy assembly.
Please note that this product should be installed by a qualified professional. It is important to ensure that the mounting surface is strong, steady, and capable of bearing the mirror's weight. Also, be cautious not to drill into any pipes or power lines behind the wall during the installation process. If necessary, use a voltage/metal detector to detect any potential hazards.
For further assistance or if you have any concerns, it is recommended to refer to the installation instructions provided with the mirror or seek professional advice.
Add New Comment