User Manual Q&AAnswer
Dec 06, 2024 - 01:09 AM
To check your blood glucose levels using the AUVON I-QARE DS-W Blood Glucose Monitor Kit, follow these steps:
1. Make sure the isolated strip is removed and the machine is off. Ensure that the battery is installed correctly.
2. Insert the strip with the blue surface facing up into the meter. If you don't see a flashing drop, make sure the meter is off before inserting the test strip.
3. Touch the drop of blood to the tip of the application zone on the test strip until you hear a "beep" sound. Do not apply blood on the top surface of the test strip.
4. Wait for 6 seconds to get the result.
Please refer to the AUVON I-QARE DS-W Blood Glucose Monitor Kit User Guide for more detailed instructions and illustrations.
Note: It is important to follow the instructions provided in the user guide for accurate blood glucose readings.
Add New Comment