User Manual Q&AAnswer
Dec 05, 2024 - 06:07 AM
To set the timer on the Vornado OSCR37 Oscillating Tower Fan and Air Circulator with Remote, follow these steps:
1. Press the timer button on the fan or remote control. The indicator lights will turn orange to indicate timer adjustment mode.
2. While in timer adjustment mode, select the desired amount of time in three-hour intervals by pressing the timer button repeatedly. Each press will increase the timer by three hours.
3. After a few seconds, the flashing orange indicator lights will turn white, indicating that you have exited the timer adjustment mode. The indicator light will continue to glow orange to indicate that the timer is set.
4. To adjust the timer setting, press the timer button again and repeat step 2.
5. To cancel the timer, cycle through the timer settings until "off" is displayed. You can also press and hold the timer button for 4 seconds. The indicator lights will flash, indicating that the timer is off. When the timer is off, the indicator light will no longer glow orange.
Please refer to the owner's guide for more detailed instructions and illustrations.
Add New Comment