User Manual Q&AAnswer
Dec 05, 2024 - 04:39 AM
To connect the Logitech 910-001354 Wireless Presenter Remote Clicker to your computer, follow these steps:
1. Insert the necessary batteries (often AAA batteries) into the remote clicker's battery compartment, ensuring the positive (+) and negative (-) ends are aligned correctly.
2. Connect the USB receiver to an available USB port on your computer. The receiver is usually stored within the battery compartment when not in use.
3. Turn on the remote clicker if it has an on/off switch. Some devices may automatically turn on when the USB receiver is attached.
4. Open your presentation program (such as Keynote or PowerPoint) and make any necessary slide preparations.
5. Once your presentation is open, you can use the remote clicker to scroll through your slides. The forward and backward buttons on the clicker are commonly used to advance and rewind the slides, respectively.
6. If your clicker has a laser pointer, there is typically a separate button to turn it on. Press and hold the laser pointer button to highlight points on the slide. Release the button to turn off the laser.
7. Some clickers may have additional controls such as volume control, timer settings, or media playback controls. Refer to the user manual for your specific model to learn how to use these features.
8. Once you have finished your presentation, simply unplug the USB receiver from your computer or switch off the remote clicker, if applicable.
Please note that these instructions are a general guide, and the specific steps may vary slightly depending on your operating system and presentation software. For more detailed information, refer to the Logitech 910-001354 Wireless Presenter Remote Clicker Quick Start Guide.
Add New Comment