How do I mount the Ubiquiti UAP-AC-M-PRO access point on a pole or wall? (Ubiquiti UAP-AC-M-PRO UniFi AC Mesh Pro Access Point Quick guide)

Answer

manuals.plus

Dec 05, 2024 - 04:26 AM

To mount the Ubiquiti UAP-AC-M-PRO access point on a pole, follow these steps:

1. Insert two Carriage Bolts into each Pole Clamp and attach a Flange Nut on each bolt. Note: The mounting assembly can accommodate a 38 - 76 mm pole.

2. Remove the Mounting Bracket from the back of the UniFi AP by depressing the two snap pins.

3. Attach one of the Pole Clamps to the pole by sliding the Carriage Bolts around the pole and into the top two slots of the Mounting Bracket. Uniformly hand-tighten each Flange Nut. Ensure the Pole Clamp is evenly clamped around the pole and tighten each Flange Nut to approximately 25 N-m.

4. Repeat steps 2 and 3 for the second Pole Clamp.

5. Attach the UniFi AP to the Mounting Bracket: Position the UniFi AP with the Mounting Bracket aligned between the mounting tabs on the back of the UniFi AP. Slide the UniFi AP downward into the grooves of the Mounting Bracket until the snap pins engage and lock the UniFi AP in place.

To mount the UniFi AP on a wall, follow these steps:

1. Securely attach the Mounting Bracket to the wall using four fasteners (not included). Note: The Mounting Bracket must attach directly to a stud or other structurally stable surface.

2. Attach the UniFi AP to the Mounting Bracket: Position the UniFi AP with the Mounting Bracket aligned between the mounting tabs on the back of the UniFi AP. Slide the UniFi AP downward into the grooves of the Mounting Bracket until the snap pins engage and lock the UniFi AP in place.

Please refer to the Ubiquiti UAP-AC-M-PRO UniFi AC Mesh Pro Access Point Quick Start Guide for visual illustrations and additional information on mounting the access point.