User Manual Q&AAnswer
Dec 05, 2024 - 01:08 AM
To pair the Nuance Dragon Bluetooth Wireless Headset with your device, please follow these steps:
1. Make sure your headset and device are both powered on and within range of each other (up to 33 feet).
2. On your device, go to the Bluetooth settings and turn on Bluetooth.
3. On the headset, switch it on by pressing the ON/OFF switch upward. The blue LED light will indicate that the headset is on.
4. Put the headset into pairing mode by pressing and holding the Mic button for approximately 3 seconds. The red and blue LED lights on the headset will flash alternately.
5. On your device, search for available Bluetooth devices. The Nuance Dragon Bluetooth Wireless Headset should appear in the list of available devices.
6. Select the headset from the list on your device to initiate the pairing process.
7. If prompted, enter the passcode "0000" (four zeros) to complete the pairing process.
8. Once the pairing is successful, the headset and device will be connected, and the LED lights on the headset will indicate the connection status.
Note: If the headset and device do not automatically connect in the future, simply turn on the headset and ensure Bluetooth is enabled on your device. They should reconnect automatically if they are within range.
For more detailed instructions and troubleshooting tips, please refer to the Nuance Dragon Bluetooth Wireless Headset User Guide.
Add New Comment