User Manual Q&AAnswer
Dec 05, 2024 - 12:59 AM
To connect the HP M426fdw Wireless Monochrome Laser Printer to a wireless network, please follow these steps:
1. Make sure your printer is turned on and in a ready state.
2. On the printer's control panel, navigate to the "Setup" menu.
3. Select "Network Setup" or "Wireless Setup" (the exact name may vary).
4. Choose the "Wireless Setup Wizard" option.
5. The printer will search for available wireless networks. Select your network from the list.
6. If prompted, enter your network's password using the printer's control panel. Use the on-screen keyboard to enter the password.
7. Once the password is entered, select "Done" or "OK" to confirm.
8. The printer will attempt to connect to the wireless network. This process may take a few moments.
9. Once the connection is established, the printer will display a confirmation message.
10. To verify the wireless connection, you can print a wireless network test report. Refer to the printer's user guide for instructions on how to print this report.
After successfully connecting the printer to your wireless network, you should be able to print wirelessly from your laptop, smartphone, or other devices that are connected to the same network. Make sure to install the necessary printer drivers and software on your devices to enable wireless printing functionality. For detailed instructions on installing the printer drivers and software, please refer to the user guide provided with the printer.
Add New Comment