User Manual Q&AAnswer
Dec 05, 2024 - 12:46 AM
To pair your Jabra Talk headset with your mobile phone, follow these steps:
1. Make sure your headset is turned on by sliding the on/off button towards the symbol "I".
2. Activate Bluetooth on your mobile phone. Refer to your phone's manual for instructions on how to do this.
3. Put your Jabra Talk headset in pairing mode. When you turn on the headset for the first time, it will automatically start up in pairing mode. The Bluetooth status indication on the StatusDisplay will be flashing.
4. Set your Bluetooth phone to discover the Jabra Talk headset. Go to the Bluetooth settings menu on your phone and select the option to discover or add a Bluetooth device.
5. Your phone will find the Jabra Talk headset under the name "Jabra TALK". Select the headset and accept the pairing request. You may be asked to enter a passkey or PIN, in which case you can use "0000" (4 zeros).
6. Once the pairing is complete, your phone will confirm the connection and the Bluetooth status indication on the StatusDisplay will shift from flashing to steady light. The headset voice guidance will also say "connected".
Note: If you need to pair the headset with a different phone or if the pairing process was interrupted, you can manually set the headset to pairing mode. Make sure the headset is on, then press and hold the answer/end button for approximately 5 seconds until the Bluetooth icon on the headset starts flashing. Repeat steps 2 and 3 in the pairing guide to complete the pairing process.
For more detailed instructions and troubleshooting tips, please refer to the Jabra Talk user manual.
Add New Comment