User Manual Q&AAnswer
Dec 05, 2024 - 12:39 AM
To pair the keyboard and mouse with your computer, follow these steps:
1. Install the batteries:
- Remove the battery cover on the keyboard and mouse.
- Insert the batteries correctly, following the polarity markings on the battery and the product.
- Place the battery covers back on.
2. Turn on the mouse:
- Set the ON/OFF switch on the bottom side of the mouse to ON.
3. Connect the nano receiver:
- Remove the battery cover of the mouse and take out the nano receiver.
- Plug the nano receiver into a USB port on your computer.
4. Pair the devices:
- If the connection fails or is interrupted, remove the nano receiver from the USB port and plug it back in.
- Press the CONNECT button on the mouse and/or keyboard.
- The LED indicator on the mouse and keyboard will blink during pairing and stop blinking when successfully paired with the receiver.
Note: Make sure the LED indicator on the mouse and keyboard is blinking during pairing. If it keeps failing for longer than 10 seconds, the LED will go off.
For more detailed instructions and troubleshooting, refer to the Amazon Basics KS1GMD-US 2.4GHz Wireless Computer Keyboard and Mouse Quick Start Guide.
Add New Comment