Answer
Dec 05, 2024 - 12:12 AM
To preheat the COSORI CS130-AO Air Fryer Toaster Oven, please follow the steps below:
1. Make sure the oven is plugged into a power outlet and the power switch is turned on.
2. Open the oven door and remove any accessories or racks that may be inside.
3. Close the oven door and select the desired cooking function using the control panel.
4. Press the "Start/Cancel" button to turn on the oven.
5. The default temperature and time settings will be displayed on the control panel.
6. To adjust the temperature, press the "Temperature" button and use the "+" or "-" buttons to increase or decrease the temperature as desired.
7. To adjust the cooking time, press the "Time" button and use the "+" or "-" buttons to increase or decrease the time as needed.
8. Once you have set the desired temperature and time, press the "Start/Cancel" button again to begin the preheating process.
9. The oven will start heating up and the temperature will be displayed on the control panel. The preheating process may take a few minutes, depending on the selected temperature.
10. When the oven reaches the set temperature, it will beep to indicate that it is preheated and ready for use.
11. Open the oven door and place your food inside using the provided accessories or racks.
12. Close the oven door and proceed with your desired cooking function.
Please note that the specific instructions for preheating and cooking may vary depending on the recipe or food you are preparing. It is always recommended to refer to the recipe or cooking instructions provided with your food for the best results. For more detailed information and illustrations, please refer to the COSORI CS130-AO Air Fryer Toaster Oven User Manual.
Add New Comment