User Manual Q&AAnswer
Dec 05, 2024 - 12:05 AM
Sure! Here's a step-by-step guide on how to set up the Synology RT6600ax dual-band Gigabit Wi-Fi router:
1. Adjust Antennas: Tilt the antennas to a 90-degree angle for optimal Wi-Fi performance.
2. Position Your RT6600ax: Place the router on a stable surface away from physical interruptions. Position it close to the center of the area where your devices are placed, with few walls and ceilings in between. Keep it away from potential signal sources and large metal or concrete objects.
3. Connect to Your RT6600ax:
a. Connect one end of the included network cable to the WAN1 port of the router and the other end to your ISP modem.
b. Connect the power adapter to the power port of the router and plug it into a power outlet.
c. Press the power button to turn on the router.
d. Wait for the STATUS and WAN LED indicators to turn green, indicating a successful connection.
4. Connect Wireless Client Devices:
a. Wait for the Wi-Fi indicator to turn static green, indicating that the Wi-Fi network is active.
b. Use your wireless device to scan and join the Wi-Fi network created by the router.
c. The default Wi-Fi network credentials are:
- SSID: Synology_(Serial)
- Password: Synology
You can change these during the initial SRM setup.
5. Connect Wired Client Devices:
a. Use network cables to connect your devices to the LAN ports on the router.
b. The LAN LED indicators should turn orange/green to indicate a successful connection.
6. Mount Your RT6600ax:
a. Ensure the router is installed in a stable location and not placed on an unsteady or inclined surface.
b. Avoid placing other heat-generating objects on top of the router.
c. Properly route all cables to prevent tripping hazards.
d. Ensure the air vents on the router are not blocked.
e. Use the provided screws to mount the router securely on the wall.
7. Set up Synology Router Manager (SRM):
a. Connect a computer or wireless device to the router's local network.
b. Open a web browser and enter either "http://router.synology.com" or "http://192.168.1.1:8000" in the address bar.
c. Follow the on-screen instructions to set up the administrator account and Wi-Fi network.
d. Choose the operation mode and Internet connection type based on your setup.
e. The setup wizard will guide you through the process, which may take up to three minutes to complete.
f. After the setup is complete, click "Start managing now" to access the SRM interface.
That's it! You have successfully set up your Synology RT6600ax dual-band Gigabit Wi-Fi router. You can now manage and customize your network settings through the SRM interface. For more detailed instructions and advanced features, refer to the provided installation guide or the Synology website.
Add New Comment