How do I install the Sunny Health & Fitness ‎NO.082 Universal Bike Mount Clamp Holder on my bike? (Sunny Health Fitness ‎NO.082 UNIVERSAL BIKE Mount CLAMP HOLDER User Manual)

Answer

manuals.plus

Dec 05, 2024 - 12:04 AM

To install the Sunny Health & Fitness ‎NO.082 Universal Bike Mount Clamp Holder on your bike, follow these steps:

1. Attach the Strap Mount's t-notch adapter into the holder's 4 slots and push up firmly to lock it in position until secure. You should hear a click. It is important to make sure that the holder is secure with the strap mount to prevent the whole unit from falling.

2. Wrap the strap around the handlebar and insert it through the slot on the mount. Pull the strap tightly to secure it. To release the strap, press and hold the two release buttons.

3. Press and hold the two buttons and pull the extendable arm up to create room for the device to fit. Make sure the height of the open clamps is shorter than the device.

4. For a secure and snug fit, pull the retractable top clamp upward while placing your device in the open clamps. Release the retractable top clamp with the device inside. Ensure that the device is secure.

5. Pull the holder's 2 lower legs outward for stable holding of larger devices.

6. To adjust the viewing angle, loosen the swivel ball head by turning it counter-clockwise. Adjust the holder for vertical or horizontal viewing, then turn the swivel ball head clockwise to tighten and secure the position. The Strap Mount comes with 2 strap spacers that can be removed when mounting on a smaller handlebar for better grip and stability.

Please note that the Sunny Health & Fitness ‎NO.082 Universal Bike Mount Clamp Holder is not designed for outdoor use on intensively moving bikes such as mountain bikes. Make sure to read the instructions completely before using the device. If you have any further questions, you can contact customer support at support@sunnyhealthfitness.com.