User Manual Q&AAnswer
Dec 05, 2024 - 12:02 AM
To mount the Ubiquiti UAP-AC-M access point on a wall, follow these steps:
1. Place the Wall Mount Bracket at the desired location on the wall, ensuring that it is plumb (level) and mark the two xxxx holes on the wall.
2. Drill out the marked holes using a 6 mm drill bit.
3. Insert a xxxx Anchor into each hole.
4. Secure the Wall Mount Bracket to the wall using two Screws.
5. Attach the UniFi AP to the Wall Mount Bracket by sliding the mounting tabs into the channel slots until it locks into place.
Please refer to the Quick Start Guide for visual illustrations of the mounting process.
Note: Make sure to use the included Wall Mount Bracket, Screws, and xxxx Anchors for proper installation.
Add New Comment