User Manual Q&AAnswer
Dec 04, 2024 - 11:57 PM
To set up the NETGEAR C6250 (AC1600) WiFi Cable Modem Router, you can follow the instructions provided in the Quick Start Guide or use the Nighthawk app. Here is a step-by-step guide:
1. Download the Nighthawk app from your app store and follow the instructions to set up your modem router and activate your internet service.
2. If you prefer not to use the Nighthawk app, you can set up the modem router using the web interface. Here are the steps:
a. Turn off and disconnect any existing modems and routers.
b. Connect a coaxial cable from the cable port on the modem router to a cable wall outlet. Ensure a tight connection.
c. Connect the power adapter to the modem router and plug it into a power outlet.
d. Wait for the Online LED to light solid green. This may take up to 10 minutes. If the Online LED doesn't light solid, make sure the cable outlet is working or contact your internet service provider (ISP).
e. Connect your computer or mobile device to the modem router using WiFi or Ethernet.
- WiFi: Use the WiFi network name (SSID) and password provided on the product label to connect.
- Ethernet: Connect an Ethernet cable from an Ethernet port on the modem router to the Ethernet port on your computer.
f. Collect the following information:
- Your cable internet provider (ISP) account information
- The cable modem model number (C6250)
- Cable modem serial number
- Cable modem MAC address
g. Activate your internet service by contacting your cable internet provider. Refer to the activation contact information provided in the manual for your specific provider.
That's it! Your NETGEAR C6250 (AC1600) WiFi Cable Modem Router should now be set up and ready to use. If you encounter any issues during the setup process, you can refer to the troubleshooting section in the manual or contact NETGEAR Technical Support for assistance.
Add New Comment