User Manual Q&AAnswer
Dec 04, 2024 - 11:47 PM
To connect the DA-9800-RV to your television monitor, you can use the RCA cable provided. However, please note that if your TV does not have RCA style A/V input jacks, you will need to use an external RF Modulator.
Here are the steps to connect the system to your TV using the RCA cable:
1. Locate the RCA Output jacks on the rear panel of the DA-9800-RV.
2. Connect the RCA cable to the RCA Output jacks of the DA-9800-RV.
3. Connect the other end of the RCA cable to the RCA A/V input jacks on your TV.
4. Make sure the TV is set to the correct input source for the RCA connection.
5. Turn on the DA-9800-RV and your TV.
If you need to use an external RF Modulator, please refer to the user manual for the RF Modulator for specific instructions on how to connect it to your TV.
Note: It is important to read the safety instructions and follow the guidelines provided in the user manual before connecting any cables or equipment.
Add New Comment