User Manual Q&AAnswer
Dec 04, 2024 - 11:44 PM
To connect your Bluetooth-enabled device to the Pyle PDA35BT, follow these steps:
1. Ensure that the amplifier is powered on and the volume is set to the low position.
2. Pull out the Bluetooth antenna on the back panel for better signal reception.
3. Press the BT/Line button switch on the front panel to activate the Bluetooth mode. You will hear the voice prompts "POWER ON" and "PAIRING," indicating that the unit is ready to pair.
4. Turn on the Bluetooth function on your external device, such as a smartphone or tablet.
5. Search for available Bluetooth devices within range of your device and select "BT-RY" from the pairing devices list.
6. After a few seconds, you will hear a voice prompt saying "Your Device is Connected," indicating a successful Bluetooth pairing.
7. You can now play music on your external device, and the audio will be streamed wirelessly through the amplifier.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment