User Manual Q&AAnswer
Dec 04, 2024 - 11:23 PM
To switch between receiving and transmitting modes on the Aluratek ABC02F, follow these steps:
1. Locate the Mode Switch on the device. It is a physical switch that allows you to toggle between the two modes.
2. Slide the Mode Switch to the desired mode. If you want to use the device as a transmitter, slide the switch to "TX" mode. If you want to use it as a receiver, slide the switch to "RX" mode.
3. After switching the mode, please wait for 3 seconds before proceeding. This will clear the pairing history of the previous devices.
4. If you were previously connected to any Bluetooth devices, you will need to re-pair them after switching modes. Follow the pairing instructions provided in the manual to connect your Bluetooth devices to the Aluratek ABC02F.
Note: It is important to wait for 3 seconds after powering off the device before switching modes. This ensures that the pairing history is cleared and allows for a smooth transition between modes.
Add New Comment