User Manual Q&AAnswer
Dec 04, 2024 - 11:13 PM
To pair the RMT-21 Remote Control with your Westinghouse TV, please follow the instructions provided in the remote's user manual. Here is a general guide on how to pair the remote control:
1. Ensure that your Westinghouse TV is turned on and within range of the remote control.
2. Locate the battery compartment on the back of the remote control and insert two AAA batteries (not included) following the polarity markings.
3. Point the remote control towards the TV and press and hold the "TV" button on the remote control for a few seconds until the LED indicator on the remote control lights up.
4. While holding the "TV" button, enter the manufacturer's code for your specific Westinghouse TV model using the numeric keypad on the remote control. Refer to the user manual or the code list provided with the remote control for the correct code.
5. Release the "TV" button and check if the LED indicator on the remote control blinks twice. This indicates that the pairing process was successful.
6. Test the remote control by pressing various buttons, such as power, volume, and channel buttons, to ensure they are functioning correctly with your Westinghouse TV.
If the pairing process does not work or you encounter any difficulties, please refer to the detailed instructions in the user manual that came with the remote control. It may contain specific troubleshooting steps or alternative methods for pairing the remote control with your Westinghouse TV.
Add New Comment