User Manual Q&AAnswer
Dec 04, 2024 - 11:09 PM
Changing the accessories on the Dremel 7760-PGK Dog Nail Grinder is quick and easy thanks to the patented EZ Twist nose cap. Here are the step-by-step instructions:
1. Ensure the grinder is turned off and disconnected from the power source.
2. Hold the grinder firmly with one hand and locate the EZ Twist nose cap at the front of the device.
3. Twist the EZ Twist nose cap counterclockwise to unlock it. You may need to apply some pressure, but be careful not to force it.
4. Once the nose cap is unlocked, gently pull it forward to remove it from the grinder.
5. Select the desired accessory from the 9-piece grooming accessory set included with the kit.
6. Align the accessory with the shaft inside the grinder, ensuring that the accessory's stem fits securely into the opening.
7. Push the accessory into the opening until it is firmly in place.
8. Twist the EZ Twist nose cap clockwise to lock it back into position. Again, apply some pressure if needed, but avoid forcing it.
9. Once the nose cap is securely locked, you can safely use the grinder with the new accessory.
For visual reference and additional details, please refer to the "Accessory Changing" section in the instruction manual provided with the product.
Add New Comment