User Manual Q&AAnswer
Dec 04, 2024 - 11:08 PM
To install the StarTech.com BOX4HDECP2 Conference Table Box for AV Connectivity, please follow these steps:
1. Using the included Die Cut Outline, trace the inner rectangle on the Table Surface in your desired location.
2. Carefully cut the rectangle out of the Table Surface.
3. Slide the Conference Table Box into the rectangular hole in your Table Surface.
4. Under the Table Surface, slide each of the Mounting Brackets into a mounting bracket slot on either side of the Conference Table Box.
5. Twist the Mounting Bracket wing screws in a counterclockwise direction until the heads of the screws are seated firmly against the underside of your table. Note: do not over-tighten the screws on the Mounting Brackets.
6. Using an HDMI Cable (sold separately), connect your HDMI enabled Display Device to the HDMI Video Out Port.
7. (Optional) Using a Phillips Head Screwdriver and the two Cable Tie Bracket Screws, attach the Cable Tie Bracket to the bottom of the Conference Table Box.
8. (Optional) Using two Cable Ties (sold separately), secure your HDMI Cable to the Cable Tie Bracket.
9. (Optional) Using an Ethernet Cable (sold separately), connect your Network Host Device to the Ethernet Port located on the bottom of the unit.
10. Connect the Universal Power Adapter to the Power Adapter Port on the Conference Table Box and to a power outlet.
Please refer to the provided Quick-Start Guide for visual illustrations and additional information.
Add New Comment