User Manual Q&AAnswer
Dec 04, 2024 - 10:55 PM
To pair the remote transmitter with the collar receiver of the SportDOG SD-1825X Dog Training Collar, please follow these steps:
1. Make sure both the remote transmitter and collar receiver are fully charged.
2. Turn on the remote transmitter by pressing and holding the power button until the indicator light turns on.
3. Turn on the collar receiver by pressing and holding the power button until the indicator light turns on.
4. On the remote transmitter, press the mode button to select the desired training mode (static stimulation, vibration, or tone).
5. Press the "+" or "-" button on the remote transmitter to adjust the stimulation level if using the static stimulation mode.
6. Press and hold the "Mode" button on the remote transmitter until the indicator light starts blinking rapidly.
7. On the collar receiver, press and hold the power button until the indicator light starts blinking rapidly.
8. Once the indicator lights on both the remote transmitter and collar receiver are blinking rapidly, release the buttons.
9. The remote transmitter and collar receiver will now attempt to pair. Wait for a few seconds until the indicator lights on both devices become solid, indicating a successful pairing.
10. Test the collar receiver by pressing the stimulation button on the remote transmitter. Ensure that the collar receiver responds to the command.
Note: If the pairing process fails, repeat the steps above. Make sure the remote transmitter and collar receiver are within range of each other and that there are no obstructions or interference.
For more detailed instructions and troubleshooting tips, please refer to the operating guide included with the SportDOG SD-1825X Dog Training Collar.
Add New Comment