User Manual Q&AAnswer
Dec 04, 2024 - 10:51 PM
To set the alarm on the Jensen JCR-295 Bluetooth Clock Radio, follow these steps:
1. Make sure the clock radio is in standby mode (not playing music or in any other mode).
2. Press and hold the ALARM 1 Button (#12) until the LED display flashes.
3. Use the MIN / HR Buttons (#6) to set the hour and minute of the alarm time.
4. Press the ALARM 1 Button (#12) to confirm the alarm time. The LED display will resume displaying the current time.
5. If you want to set a second alarm, repeat steps 2-4 using the ALARM 2 Button (#12).
Note: If both Alarm 1 and Alarm 2 are set at the same time, only Alarm 2 will function.
To choose whether you want to wake up to the alarm sound or the radio:
1. In standby mode, press the ALARM 1 Button (#12) repeatedly to set Alarm 1.
2. If you want to wake up to the alarm sound, the Alarm 1 WAKE to ALARM Indicator (#2) will light up.
3. If you want to wake up to the radio, the Alarm 1 WAKE to RADIO Indicator (#2) will light up.
4. If you don't want the alarm to go off, both the WAKE to ALARM and WAKE to RADIO Indicators will be off.
To stop the alarm sound:
When the alarm sounds, press the POWER/FUNCTION Button (#5) once to stop the alarm. The alarm will repeat at the same time the next day.
To completely turn off the alarm (not reset for the next day):
1. In standby mode, press the ALARM 1 or ALARM 2 Buttons (#12) repeatedly until the alarm wake up ALARM and RADIO indicators (#2 & #11) are off.
To check the alarm time:
In standby mode, press and hold the ALARM 1 or ALARM 2 Button (#12) until the alarm time is displayed.
To snooze the alarm:
After the alarm or radio sounds, you can press the SNOOZE button (#16) for a few more minutes of sleep. The alarm will stop for approximately 9 minutes and then turn on again.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment