User Manual Q&AAnswer
Dec 04, 2024 - 10:50 PM
To connect the Luqeeg MSaGv4ohzT WiFi 3D Hologram Projector to your WiFi network, follow these steps:
1. Power on the projector by pressing the power button on the device or using the included remote control.
2. Wait for the projector to initialize and enter the WiFi setup mode.
3. On your smartphone, tablet, or computer, navigate to the device's settings menu.
4. Look for the WiFi settings and select it.
5. Find your WiFi network from the list of available networks and select it.
6. Enter your WiFi network password, if prompted.
7. Wait for the projector to establish a connection with your WiFi network. This may take a few moments.
8. Once the connection is established, you should see the projector listed as a connected device on your network.
9. You can now control the projector using the dedicated mobile app or software provided by Luqeeg. Make sure to download and install the app on your device if you haven't done so already.
10. Open the app and follow the instructions to connect to the projector. You may need to enter a pairing code or scan a QR code to establish the connection.
11. Once connected, you can use the app to upload visuals, customize settings, and control the display of the holographic visuals.
Please refer to the user manual provided with your Luqeeg MSaGv4ohzT WiFi 3D Hologram Projector for any specific instructions or troubleshooting tips related to WiFi connectivity.
Add New Comment