User Manual Q&AAnswer
Dec 04, 2024 - 10:49 PM
To pair your device with the Pro Armor AU51080 Bluetooth Sound Bar System, follow these steps:
1. Power on the soundbar using either the power button or the orange remote turn-on wire.
2. During power-up, the blue LED on the right of the control panel will blink, indicating that it is in Bluetooth search mode.
3. On your device, go to the Bluetooth settings and make sure Bluetooth is enabled.
4. Search for available Bluetooth devices. "PRO ARMOR" should appear in the list of devices when the search has connected with your soundbar.
5. Select "PRO ARMOR" on your device to initiate the pairing process.
6. Once the connection is made, the blue LED on the soundbar will change to solid, indicating a successful pairing.
7. After the initial pairing, the soundbar will automatically reconnect to your device when it is in range.
8. If you want to connect a different device, you will need to disconnect the first device before pairing the new one.
9. When receiving a phone call, the audio signal will mute but not disconnect.
10. To switch to the 3.5mm auxiliary input, press and hold the power button for three seconds.
11. To switch back to Bluetooth mode, press and hold the power button again for three seconds.
For more detailed instructions, please refer to the Pro Armor AU51080 Bluetooth Sound Bar System Operator's Guide.
Add New Comment