User Manual Q&AAnswer
Dec 04, 2024 - 10:36 PM
To connect the Beyma PRO8MI speaker to an amplifier, follow these steps:
1. Locate the speaker terminals on the back or bottom of the PRO8MI speaker. These terminals are where the speaker cables from the amplifier will be connected.
2. Identify the positive and negative terminals on the speaker. They are usually labeled with "+" and "-" symbols.
3. Take the positive wire from the amplifier and connect it to the terminal labeled "+". Ensure a secure connection.
4. Take the negative wire from the amplifier and connect it to the terminal labeled "-". Again, ensure a secure connection.
5. Double-check that the connections are secure and that the wires are properly inserted into the terminals.
6. Verify that your amplifier is compatible with an 8-ohm load or impedance, which is the nominal impedance of the PRO8MI speaker. Using an amplifier with a different impedance rating may result in inappropriate power delivery and potential damage to the amplifier or speaker.
By following these steps, you can establish a full and functioning electrical connection between the Beyma PRO8MI speaker and your amplifier. For additional guidance, refer to the user manual provided with the speaker.
Add New Comment