User Manual Q&AAnswer
Dec 04, 2024 - 10:23 PM
To connect the Aluratek AVS02 2-Port VGA Video Splitter to your computer and monitors, please follow these steps:
1. Connect the VGA output from your computer to the VGA IN port of the AVS02 using the VGA cable included in the package.
2. Connect the VGA output of the video splitter to one of your monitors using a VGA cable. Repeat this step for the second monitor.
Note: The VGA cables for connecting the video splitter to the monitors are not included and usually come with the monitors.
3. Connect the power supply to the video splitter's power adapter port.
4. Turn on your computer and the video splitter. The power LED on the video splitter should turn on, indicating that it is powered.
5. Check if the active LED on the video splitter turns on. This indicates that there is an active source connected to the VGA IN port.
Once you have completed these steps, your computer's VGA video signal will be split and displayed on both connected monitors. If you encounter any issues during the setup process, please refer to the Aluratek AVS02 2-Port VGA Video Splitter Quick Start Guide or contact Aluratek support for further assistance.
Add New Comment