User Manual Q&AAnswer
Dec 04, 2024 - 09:55 PM
To pair the handheld microphone with the receiver in the Aveek E8 Wireless Microphone System, please follow these steps:
1. Make sure both the handheld microphone and the receiver are turned off.
2. Press and hold the hidden key in the battery compartment of the handheld microphone, as well as the on/off key simultaneously for about 4 seconds.
3. While holding both keys, observe the LED digital screen on the handheld microphone. It should flash for about 1 second.
4. Release the keys. The handheld microphone will enter the pairing state, and the LED digital screen will continue flashing.
5. Turn on the receiver within 2 seconds after the power switch is turned on. The receiver will automatically enter the pairing state and search for a pairing request.
6. If the receiver receives a pairing request from the handheld microphone, it will automatically pair. The pairing indicator on the receiver will flash three times to confirm a successful pairing, and then it will automatically exit the pairing state.
7. After the microphone is successfully paired, briefly press the hidden switch in the battery compartment of the handheld microphone once. This will automatically exit the pairing state and perform a "frequency switching" operation, returning the microphone to normal transmission status.
By following these steps, you should be able to pair the handheld microphone with the receiver in the Aveek E8 Wireless Microphone System.
Add New Comment