User Manual Q&AAnswer
Dec 04, 2024 - 09:27 PM
Sure! Here's a step-by-step guide to setting up the IOGEAR GWHDMS52MB Long Range Wireless 5x2 HDMI Matrix PRO:
1. Connect your HDMI sources: Use HDMI cables to connect up to five HDMI source devices (such as gaming consoles, Blu-ray players, or cable/satellite boxes) to the HDMI input ports on the matrix unit. Make sure each source device is powered on and set to the desired output resolution.
2. Connect your displays: Use HDMI cables to connect up to two HDMI displays (such as TVs or projectors) to the HDMI output ports on the matrix unit. Ensure that the displays are powered on and set to the correct input source.
3. Power on the matrix unit: Connect the included power supply to the DC input port on the matrix unit, and then plug the power supply into a power outlet. The matrix unit will power on automatically.
4. Pair the transmitter and receiver: The GWHDMS52MB uses a wireless transmitter and receiver to transmit the HDMI signals. Press and hold the "Pair" button on the transmitter for about 5 seconds until the LED indicator starts blinking. Then, press and hold the "Pair" button on the receiver for about 5 seconds until its LED indicator starts blinking. Once the LED indicators on both devices become solid, the pairing is complete.
5. Select the desired input source: Use the included IR remote control to select the desired input source. Press the corresponding input number (1-5) on the remote control to switch between different HDMI sources.
6. Enjoy wireless HDMI transmission: The matrix will wirelessly transmit the selected HDMI source to the connected displays. You can now enjoy high-definition video and audio without the need for messy cables.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the IOGEAR GWHDMS52MB Long Range Wireless 5x2 HDMI Matrix PRO.
Add New Comment