User Manual Q&AAnswer
Dec 04, 2024 - 10:50 AM
To connect your smartphone to the Pyle PTA22BT amplifier via Bluetooth, follow these steps:
1. Make sure the amplifier is powered on and the volume is set to a low level.
2. Pull out the BT Antenna located on the back panel of the amplifier for better signal reception.
3. Press the MODE button on the front panel of the amplifier. The BT Indicator light will illuminate, indicating that the amplifier is ready to pair with your device.
4. On your smartphone, enable the Wireless BT function.
5. Search for available devices within range of your smartphone's Bluetooth function.
6. Wait for a moment, and you should see "PYLEUSA" or "BT" (depending on your device) in the list of paired devices. Select the appropriate option.
7. Once the pairing is successful, the amplifier will emit a beep sound and the lights will flash briefly.
8. You can now play music and other audio from your smartphone through the amplifier's speakers.
9. When you want to disconnect or turn off the external device, the amplifier will emit another beep sound and the lights will flash again.
Please note that the specific steps may vary slightly depending on your smartphone's operating system and Bluetooth settings. Refer to your smartphone's user manual for more detailed instructions on connecting to Bluetooth devices.
Add New Comment