User Manual Q&AAnswer
Dec 04, 2024 - 08:15 AM
To connect the Mimio 280 Ultra-Short Throw DLP Projector to your computer, please follow these steps:
1. Ensure that both your computer and the projector are powered off.
2. Locate the HDMI or VGA port on your computer. The type of port will depend on your computer's specifications.
3. Connect one end of the HDMI or VGA cable to the corresponding port on your computer.
4. Locate the HDMI or VGA input port on the back of the Mimio 280 projector.
5. Connect the other end of the HDMI or VGA cable to the input port on the projector.
6. Power on your computer and the Mimio 280 projector.
7. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
8. In the display settings, select the option to extend or duplicate your desktop to the projector. This will allow your computer screen to be displayed through the projector.
9. Adjust the projector's focus and position as needed to ensure a clear and properly aligned projection.
For more detailed instructions and troubleshooting tips, please refer to the User Guide provided with the Mimio 280 Ultra-Short Throw DLP Projector. You can access the User Guide by clicking on the link provided above.
Add New Comment