User Manual Q&AAnswer
Dec 04, 2024 - 06:58 AM
To connect your laptop to the Epson VS250 projector, please follow these steps:
1. Make sure your laptop and the projector are both powered off.
2. Locate the HDMI port on the back of the projector.
3. Connect one end of an HDMI cable to the HDMI port on the projector.
4. Locate the HDMI port on your laptop. It is usually located on the side or back of the laptop.
5. Connect the other end of the HDMI cable to the HDMI port on your laptop.
6. Power on your laptop and the projector.
7. On your laptop, press the appropriate key combination (e.g., Fn + F4 or Fn + F8) to switch the display output to the external monitor or projector. This key combination may vary depending on your laptop model.
8. The projector should detect the HDMI input and display the content from your laptop.
For more detailed instructions and troubleshooting tips, please refer to the User's Guide provided with the Epson VS250 projector. You can find the User's Guide in the link above.
Add New Comment