User Manual Q&AAnswer
Dec 04, 2024 - 06:43 AM
Installing the Onelink 1039102 Smart Smoke & CO Alarm + Premium Speaker is a straightforward process. Here are the step-by-step instructions:
1. Before starting the installation, make sure to read the user manual thoroughly for complete instructions and safety precautions.
2. Choose the ideal location for the alarm. It is recommended to install it on the ceiling, as close to the center of the room as possible. Avoid placing it near air vents, windows, or doors.
3. Turn off the power to the area where you will be installing the alarm. This is important to ensure your safety during the installation process.
4. Remove the existing smoke alarm, if applicable, from the mounting bracket. Disconnect the wires from the old alarm and remove it completely.
5. If your home has a hardwired smoke alarm system, the Onelink 1039102 can be connected to the existing wiring. Use the included adapter plugs to match the wiring connections. Follow the instructions in the user manual for proper wiring.
6. Attach the mounting bracket provided with the Onelink 1039102 to the ceiling using the included hardware. Make sure it is securely fastened.
7. Connect the wires from the alarm to the corresponding wires in the mounting bracket. Follow the color-coded labels for proper connections.
8. Once the wiring is complete, attach the Onelink 1039102 Smart Smoke & CO Alarm + Premium Speaker to the mounting bracket. Twist it clockwise until it locks into place.
9. Turn the power back on and test the alarm to ensure it is functioning properly. Follow the testing instructions in the user manual.
10. Download the Onelink Home app on your smartphone or tablet. Follow the app's instructions to connect the alarm to your home network and enable remote notifications.
Please note that these instructions are a general guide. For specific details and illustrations, refer to the user manual provided with the product.
Add New Comment