User Manual Q&AAnswer
Dec 04, 2024 - 06:40 AM
To install the Onelink 1039287 Smoke Detector and Carbon Monoxide Detector, please follow the steps outlined in the user manual provided. Here is a brief overview of the installation process:
1. Before installation, make sure to read and understand the user manual thoroughly.
2. Determine the ideal location for the detector. It is recommended to install one detector on each level of your home and in every bedroom or sleeping area.
3. Turn off the power to the existing hardwired smoke or carbon monoxide alarm at the circuit breaker.
4. Remove the existing alarm from the mounting bracket and disconnect the wires.
5. Connect the wires from the Onelink detector to the corresponding wires in your electrical box. Follow the wiring diagram provided in the user manual.
6. Mount the Onelink detector onto the existing mounting bracket or use the included adapter plug if needed.
7. Turn on the power at the circuit breaker and test the detector to ensure it is functioning correctly.
For more detailed instructions, including illustrations and safety precautions, please refer to the user manual provided. It is important to follow the installation instructions carefully to ensure proper functionality and safety.
Add New Comment