How do I set up the VocoPro VHF-3005 VHF Wireless Microphone System? (VocoPro VHF-3005 VHF Wireless Microphone System User Manual)

Answer

manuals.plus

Dec 03, 2024 - 10:40 AM

Setting up the VocoPro VHF-3005 VHF Wireless Microphone System is a straightforward process. Here are the steps to get started:

1. Connect the receiver: Start by connecting the dual-channel receiver unit to your audio system. Use the included cables to connect the audio output of the receiver to the input of your sound system or mixer.

2. Power on the receiver: Plug in the power supply for the receiver and turn it on. Make sure the receiver is placed in a location with good signal reception and minimal interference.

3. Insert batteries: Open the battery compartment of each handheld microphone and insert two AA batteries into each microphone. Make sure to follow the correct polarity (+/-) indicated inside the battery compartment.

4. Synchronize the microphones: On the receiver unit, locate the synchronization button or switch for each microphone channel. Press and hold the synchronization button on the receiver for the first microphone channel. Then, turn on the corresponding handheld microphone by pressing its power button. The receiver and microphone will automatically sync and establish a connection. Repeat this process for the second microphone channel.

5. Adjust volume levels: Use the separate volume controls on the receiver to adjust the volume levels for each microphone channel. This allows you to balance the audio levels between the two microphones.

6. Test the system: With the setup complete, test the system by speaking or singing into each microphone. Ensure that the audio is clear and that both microphones are functioning properly.

For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the VocoPro VHF-3005 VHF Wireless Microphone System.