User Manual Q&AAnswer
Dec 03, 2024 - 10:34 AM
1. Start by connecting the receiver to your Pyle PDWM1904 8-Channel Wireless Microphone System. Plug the AC/DC adapter into the power jack on the back of the receiver, and then connect the audio output cables (XLR or 1/4") from the receiver to the input ports on your amplifier or mixer.
2. Install batteries in the handheld microphone or body-pack transmitter. Open the battery cover and insert the required batteries (usually 2 x AA) with the correct polarity (+/-).
3. Turn on the receiver by pressing the power button. The power indicator should light up.
4. Press and hold the "SET" button on the receiver until the display starts flashing. Release the button.
5. While the display is flashing, press the "SET" button again to select the desired channel. The selected channel will be saved automatically after 5 seconds of no action.
6. Power on the microphone or transmitter. Press and hold the "UP" and "DOWN" arrow keys on the transmitter until the channel number on the display starts flashing.
7. While the channel number is flashing, use the "UP" and "DOWN" arrow keys to select the same channel as chosen on the receiver. The selected channel will be saved automatically after 5 seconds of no action.
8. Repeat the above steps if you have additional microphones or transmitters to connect.
Note: Make sure the receiver and transmitters are within the operating range (up to 160 feet) and that there are no obstacles or interference that could affect the signal quality. Refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment