User Manual Q&AAnswer
Dec 03, 2024 - 10:15 AM
To connect your external audio device, such as an iPod, to the VocoPro THUNDER-1500 for music playback, follow these steps:
1. Locate the Line In jack on the THUNDER-1500 system. It is usually labeled as "Line In" or "Aux In" and is typically located on the back or side of the unit.
2. Use a suitable audio cable (not included) to connect the line out or headphone jack of your iPod to the Line In jack on the THUNDER-1500. Make sure the cable is securely plugged into both devices.
3. Press the "MODE" button on the included remote control or on the control board of the THUNDER-1500 repeatedly until the Line input mode is selected. This will ensure that the system recognizes the audio input from your iPod.
4. Select your favorite song on your iPod and start playing it. You may need to adjust the output volume of your iPod if the headphone jack is used for making the connection.
5. Turn on your microphone and start singing. Adjust the MASTER VOLUME and/or MIC VOLUME if necessary. You may also use the ECHO CONTROLS to enhance your singing experience.
6. When you are finished using the THUNDER-1500 system, turn off both your iPod and the THUNDER-1500, and disconnect the audio cable.
Please refer to the VocoPro THUNDER-1500 Portable karaoke System Owner's Manual for more detailed instructions and troubleshooting tips.
Add New Comment