User Manual Q&AAnswer
Dec 03, 2024 - 09:59 AM
To connect and project your computer screen using the Casio XJ-UT310WN Ultra Video Projector, follow these steps:
1. Ensure that your computer and the projector are both powered off.
2. Connect one end of a USB cable to the USB port on the back of the projector.
3. Connect the other end of the USB cable to a USB port on your computer.
4. Power on the projector and wait for it to start up.
5. On your computer, open the display settings or control panel.
6. Select the option to detect displays or external monitors.
7. Your computer should detect the projector as an additional display. Select the projector as the display option.
8. Adjust the display settings on your computer to match the resolution and aspect ratio of the projector (typically WXGA, 1280 x 800 pixels).
9. Once the settings are adjusted, your computer screen should be projected onto the projector.
10. If necessary, use the projector's remote control or on-screen menu to adjust the projection size, focus, and other settings.
Please refer to the user's guide provided above for more detailed instructions and troubleshooting tips.
Add New Comment