User Manual Q&AAnswer
Dec 03, 2024 - 07:16 AM
To pair the Leviton 33A00-19 Lumina Keypad with ZigBee devices, follow these steps:
1. Ensure that the Leviton 33A00-19 Lumina Keypad is properly installed and connected to your HAI Home Control system through the serial port.
2. On the keypad, navigate to the device pairing menu. This can usually be accessed through the digital display or menu buttons on the keypad.
3. Activate the pairing mode on the ZigBee device you want to pair with the keypad. Refer to the specific device's user manual for instructions on how to do this.
4. On the keypad, select the option to search for ZigBee devices. The keypad will scan for nearby devices.
5. Once the ZigBee device is detected, it will appear on the keypad's display. Select the device from the list.
6. Follow any on-screen prompts or instructions to complete the pairing process. This may involve entering a PIN or confirming the pairing on both the keypad and the ZigBee device.
7. Repeat the above steps for each ZigBee device you want to pair with the Leviton 33A00-19 Lumina Keypad.
Note: It's important to ensure that the ZigBee devices you are trying to pair are compatible with the ZigBee Home Automation Profile. Also, if you are experiencing difficulty pairing, try moving the keypad or the ZigBee device closer to each other to strengthen the signal.
For more detailed instructions and troubleshooting tips, refer to the Leviton 33A00-19 Lumina Keypad User Manual.
Add New Comment