User Manual Q&AAnswer
Dec 02, 2024 - 05:41 AM
To connect a microphone to the Pyle PAD30MXUBT audio mixer, follow these steps:
1. Locate the MIC/LINE IN jack on the mixer. This is a combined jack that can be used to connect a mono signal, such as an XLR microphone or a 1/4" line level.
2. Choose a balanced cable and a microphone with an XLR output. Do not use unbalanced cables.
3. Make sure the mixer is powered off before making any connections.
4. Connect one end of the balanced cable to the XLR output of the microphone.
5. Connect the other end of the balanced cable to the MIC/LINE IN jack on the mixer.
6. If you are using a condenser microphone that requires phantom power, make sure the mixer is providing +18V phantom power to the XLR jack. This is always present at the XLR jack.
7. Once the microphone is connected, you can adjust the input amplification using the GAIN control for the corresponding channel.
8. Adjust the LEVEL control for the microphone channel to set the input level.
9. You can also use the HI and LO controls to adjust the high and low frequencies of the microphone signal.
10. Finally, use the PAN/BAL control to adjust the panorama or balance of the microphone signal in the stereo field.
11. You can monitor the microphone signal through the headphones by connecting them to the HEADSET jack and adjusting the volume with the MONITOR/PHONES control.
Please refer to the Pyle PAD30MXUBT user manual for more detailed instructions and specifications.
Add New Comment