User Manual Q&AAnswer
Dec 02, 2024 - 05:37 AM
To connect the Peavey PVi100 microphone to a mixer or audio interface, you will need an XLR cable. Follow these steps:
1. Locate the XLR connector on the bottom of the microphone.
2. Take one end of the XLR cable and insert it into the XLR connector on the microphone. Make sure it is securely connected.
3. Take the other end of the XLR cable and insert it into the XLR input on your mixer or audio interface. Again, ensure a secure connection.
4. If your mixer or audio interface has multiple input channels, choose the desired channel for the microphone input.
5. Adjust the input gain or trim control on your mixer or audio interface to set the appropriate level for the microphone.
Refer to the manual for your specific mixer or audio interface for further instructions on adjusting levels and routing the microphone signal.
Add New Comment