User Manual Q&AAnswer
Dec 02, 2024 - 05:00 AM
To connect your Dell 4320 Network DLP Projector to a computer, follow these steps:
1. Ensure that both the projector and the computer are powered off.
2. Locate the VGA or HDMI port on your computer. The VGA port is typically blue, while the HDMI port is rectangular with a trapezoidal shape.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the back of the projector.
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Power on the projector and the computer.
7. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
8. In the display settings, select the option to detect or identify displays. This will allow your computer to recognize the projector.
9. Once the projector is detected, you can choose to extend or duplicate your computer screen onto the projector. Select the desired display mode.
10. Adjust the focus and position of the projected image using the projector's controls.
For more detailed instructions and troubleshooting tips, please refer to the User's Guide provided with the Dell 4320 Network DLP Projector. You can access the User's Guide by clicking on the link provided above.
Add New Comment