User Manual Q&AAnswer
Dec 02, 2024 - 04:48 AM
The SereneLife IPCAMHD30 camera supports easy DIY wireless connections. Here is a step-by-step guide to connecting it to the Internet:
1. Wire the camera to power using the provided power adapter.
2. Open the "MIPC" app on your mobile device or computer.
3. Click on the "+" icon in the top left corner of the app to add a camera.
4. Choose "PTZ cameras" and scan the QR code on the bottom of the camera.
5. Tap the "Add" button to enter the network connection interface.
6. Select either "Sound connection" or "Ethernet connection" to connect the camera.
Option 1: Sound connection
a. Click the "Sound connection" icon and set up Wi-Fi for the camera. Make sure your Wi-Fi is 2.4GHz.
b. Power on the camera by connecting it to the power source. After 30-60 seconds, you will hear a chime and the IR light will turn off, indicating that the camera is powered on.
c. If you hear the chime, click "Already heard the voice hint" and wait until the camera is successfully connected. If you don't hear the chime, press the RESET button for 1 second, and then click "Already heard the voice hint" and wait until the camera is successfully connected.
Option 2: Ethernet connection
a. Click the "Ethernet connection" icon.
b. Power on the camera and connect it to your router using an Ethernet cable. The camera will be powered on within 30-60 seconds.
c. Add the matched device until the setup is successful.
Please note that if you encounter any issues during the setup process, refer to the troubleshooting section in the user guide or contact customer support for further assistance.
Add New Comment