User Manual Q&AAnswer
Dec 02, 2024 - 04:19 AM
To enroll/add the module to your Z-Wave network, follow these steps:
1. Enter the 4-8 digit Master PIN code followed by the key.
2. Press the key followed by the key.
3. Press the key followed by the key.
This process will put the module into inclusion mode, allowing it to be added to your Z-Wave network. Make sure to have your Z-Wave controller in inclusion mode as well during this process.
For more detailed information, please refer to the "Enrolling/Unenrolling the Network Module" section in the Yale AYR202-ZWV Z-wave Plus Electronic Locks Module Instruction Manual.
Add New Comment